News
-
How to configure a more reasonable configuration for motors using angular contact ball bearings?
For vertical motors where axial force exists objectively, most angular contact ball bearings are used, that is, the axial load-bearing capacity of the bearing body is used to balance the downward axial force generated by the weight of the rotor of the vertical motor. In the structural design of t...Read more -
The relationship between the no-load current of motors with the same power but different pole numbers
No-load current refers to the size of the current when the motor is not pulling a load. In order to describe the size of the no-load current, the ratio of the no-load current to the rated current is often used for comparative analysis. To this end, we start with the relationship between rated cur...Read more -
The permanent magnet synchronous motor market will enter a stable period of development
With the introduction of the national double carbon target requirements and policies, high-efficiency motors have quietly become a necessary power source to support the large-scale equipment update process. In addition to traditional markets such as new energy vehicles and household appliances, h...Read more -
Effect of winding insulation paint on motor efficiency
Insulation treatment is a key factor in the reliability of motor products. In any motor manufacturing company, the insulation treatment process of windings is a key point of quality control. The quality of the insulating paint itself and the process control effect all affect the motor to varying ...Read more -
What links can easily lead to motor shaft breakage and quality problems?
Shaft breakage is a quality problem that occurs from time to time in motor products, and more often occurs in large-sized motors. The fault is characterized by the regularity of the fracture locations, that is, the root of the shaft extension, the root of the bearing position, and the weld end of...Read more -
Is it more cost-effective to replace the motor with a new one or remanufacture it?
Remanufacturing is a new measure currently proposed for the elimination of high energy-consuming equipment. Motor remanufacturing has once become a popular business for many motor manufacturers and repair units, and some units have specifically carried out motor remanufacturing work. With the gov...Read more -
How much influence does the heat dissipation medium have on the temperature rise of the motor?
Temperature rise is a very critical performance indicator of motor products. When the motor temperature rise is high, on the one hand, it affects the surrounding environment, and on the other hand, it is directly related to its efficiency level. The temperature rise of high-efficiency motors is v...Read more -
Why does the motor become very hot after running?
Any electrical product, including motors, will generate heat to varying degrees during operation. However, under normal circumstances, heat generation and heat dissipation are in a relatively balanced state. For motor products, the temperature rise index is used to characterize the heat generatio...Read more -
SCZ Series Synchronous Reluctance Motors
SCZ Series permanent magnet assisted synchronous reluctance motors use ferrite to generate permanent magnet auxiliary torque and take reluctance torque as the main driving torque. The motors have the characteristics of high power density and small size.The motors can be used to drive light indus...Read more -
Is it true that the greater the power of a motor, the stronger its power?
A motor with a higher power does not necessarily mean it is more powerful, because the power of a motor depends not only on power but also on speed. The power of a motor represents the work done per unit time. A higher power means that the motor converts more energy per unit time, which theoretic...Read more -
Why does the motor have shaft current? How to prevent and control it?
Shaft current is a common and unavoidable problem for high-voltage motors and variable-frequency motors. Shaft current can cause great damage to the bearing system of the motor. For this reason, many motor manufacturers use insulating bearing systems or bypass measures to avoid shaft current prob...Read more -
2024 Russian INNOPROM
We will take part in 2024 Russian INNOPROM HALL1 BOOTH C7 / 7.18-7.11 2024 Looking forward to seeing you!Read more