Cast iron motor IE3 Series Motor

SUNVIM IE3 electric motors are manufactured according to international standard IEC60034-30-1:2014. All IE3 motors are provided with premium quality cold-rolled silicon steel, low harmonics winding, VPI vacuum pressure impregnation and high precision CNC machining process.  SUNVIM IE3 motors have the advantage of high efficiency, low  temperature rise, low noise, good reliability and long service time. The motors can be provided with protection grade IP55, IP56, IP65, IP66 and insulation grade F, H, and have registered in national energy label system.


  • Standard: IEC60034-30-1
  • Frame size: H80-355mm
  • Rated power: 0.75kW-375kW
  • Degrees or energy efficiency: IE3
  • Voltage and frequency: 400V/50Hz
  • Product Detail

    Product Tags

    IE3 Series motors are cage induction motor designed in accordance with  IEC60034-30 standards and IE3 energy efficiency。

    Specification

    Standard IEC60034-30-1
    Frame size H80-355mm
    Rated power 0.75kW-375kW
    Degrees or energy efficiency IE3
    Voltage and frequency 400V/50Hz
    Degrees of protections  IP55
    Degrees of insulation/Temperature rise  F/B
    Installation Method  B3、B5、B35、V1
    Ambient temperature  -15°C ~+40°C
    Relative humidity should be less than 90%
    Altitude should be lower than 1000 m above sea level
    Cooling Method  IC411 、IC416、IC418、IC410

    Factory Production Process

    2
    1
    4
    3
    2

    Ordering Information

    ● This catalogue is for the user's information only. Please excuse that if there are any changes to the product, no additional notes will be made in advance.

    ● When ordering, please note the rating data, such as motor type, power, voltage, speed, insulation class, protection class, mounting method, etc.

    ● We can design and manufacture special motors according to customer requirements as follows
    1. special voltages, frequencies and powers
    2. special insulation and protection classes
    3. with left-hand terminal box, double shaft ends and special shafts
    4. High temperature motors or low temperature motors.
    5. Highland or outdoor use
    6. Higher power or special service factors
    7. with heating, bearings or windings PT100, PTC, etc.
    8. with encoder, isolated bearings or isolated bearing construction.
    9. Other requirements.

    Really should any of these items be of interest to you, please let us know. We will be pleased to give you a quotation upon receipt of one's detailed specifications. We've our personal specialist R&D enginners to meet any of the requriements, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.


  • Previous:
  • Next:

  • Write your message here and send it to us