IE1 Series Three-phase Induction Motor

SUNVIM IE1 electric motors are independently designed, and has obtained the national layout-design invention patent. The motors are designed with reliable structure, low noise and low vibration. They are widely used to drive various general equipments, like fans, pumps, machining tools, compressors, and transport machineries. The motors can also work safely and stably in industry field of petroleum, chemical , steel, mining and other places where there is with heavy load and harsh operating environment. All IE1 motors are provided with premium quality cold-rolled silicon steel, protection degree IP55 and insulation grade F. The dimension and efficiency comply to international standard IEC60034, and is the preferred choice to replace Y, Y2, and Y3 series motor.

  • Standard: IEC60034-30-1
  • Frame size: H80-355mm
  • Rated power: 0.18kW-315kW
  • Degrees or energy efficiency: IE1
  • Voltage and frequency: 400V/50Hz
  • Product Detail

    Product Tags

    IE1 Series motors are cage induction motor designed in accordance with  IEC standards and IE1 energy efficiency.


    Standard IEC60034-30-1
    Frame size  H80-355mm
    Rated power 0.18kW-315kW
    Degrees or energy efficiency IE1
    Voltage and frequency 400V/50Hz
    Degrees of protections  IP55
    Degrees of insulation/Temperature rise  F/B
    Installation Method  B3、B5、B35、V1
    Ambient temperature  -15°C ~+40°C
    Relative humidity should be less than 90%
    Altitude should be lower than 1000 m above sea level
    Cooling Method  IC411、IC416、IC418、IC410

    Ordering Information

    ● This catalogue is for the user's information only. We apologise for not giving advance notice of any product changes.

    ● When ordering, please specify the motor type, power, voltage, speed, insulation class, protection class, mounting method, etc.

    ● We can design and manufacture special motors to customer requirements as follows
    1. special voltage, frequency and power
    2. special insulation and protection classes
    3. with left hand terminal box, double shaft ends and special shafts
    4. High temperature or low temperature motors.
    5. High altitude or outdoor use
    6. Higher power or special service factors
    7. with heating, bearings or windings PT100, PTC, etc.
    8. with encoder, isolated bearings or isolated bearing construction
    9. Other requirements.

  • Previous:
  • Next:

  • Write your message here and send it to us