YEJ Series Electromagnetic Breaking Three-Phase Induction Motor

YEJ series motors are derived from IE1 series motors with fast braking, simple structure and high stability. They are widely used on mechanical equipment and driving machines where rapid and accurate braking is demanded, such as lathe machine, packing machine, wood machine, food processing equipment, chemical engineering, textile machine, architectural machine, gear reducer and so on.

Frame size: H80-225mm

Rated power: 0.55kW-45kW

Voltage and frequency: 400V/50Hz

Send email to us Catalogue

Product Detail

Product Tags

YEJ series motors can fast braking, used on mechanical equipment and driving machines where rapid and accurate braking is demanded.

Specification

Frame size	H80-225mm
Rated power	0.55kW-45kW
Voltage and frequency	400V/50Hz
Degrees of protections	IP55 (motor)、IP23 (braker)
Degrees of insulation/Temperature rise	F/B
Installation Method	B3、B5、B35、V1
Ambient temperature	-15C ~+40°C
Relative humidity should be less than 90%.
Altitude should be lower than 1000 m above sea level
Cooling MethodPerformance data same lE1 serizes motorBrake type: brake after power loss	IC411 、IC416、IC418、IC410

Packaging

Ordering Information

● This catalogue is only a reference for users. Please forgive that if any change ofproducts will not make additional specify in advance.This catalogue is only a reference for users. Please forgive that if any change ofproducts will not make additional specify in advance.
● Please note the rated data when ordering, such as the motor type,power,voltage, speed, insulation class, protection class, mounting type and so on.
● We can design and produce special motors as followed according to therequirement of customer:
1. special voltage, frequency and power;
2. special insulation class and protection class;
3. with terminal box on the left side, double shaft ends and special shaft;
4. high temperature motor or low temperature motor;
5. used on plateau or outdoor;
6. higher power or special service factor;
7. with heater, PT100 for bearings or winding, PTC and so on;
8. with encoder, insulated bearings, or insulated bearing structure;
9. with others requirement.